AIRPURION 90 active ET with separate control box
...is characterized by an extraordinarily high disinfection performance with a compact design and low energy consumption. It is designed in accordance with applicable laws, standards and directives.
This device consists of a matte anodized aluminum profile with matching cover plates. The lamp compartment is designed with a reflector made of polished aluminum. The rear section houses the wiring and the electronic ballast.
If desired, handles for manual handling or fittings for wall or ceiling mounting can be attached to the rear.
Lamp failure or cable breakage is monitored internally. An associated isolating contact can be used for external signaling or for switching operations.
The UV lamps used are characterized by a long service life, high disinfection performance, and low energy consumption. Optionally, the power supply can be 230 V/50 Hz or even 110 V/60 Hz.
The compact design allows for simple lamp removal and replacement, for example, at the end of the lamp’s service life.
The device can also be supplied for use in damp rooms.
WARNING!
UV radiation is dangerous for skin and eyes! Eyes and skin must be properly protected. The user is responsible for their own safety as well as the safety of the persons present in the room where these lamps are used.
Please note that materials that are not resistant to UVC may be damaged.
Technical Data
| Manufacturer | PURION GmbH |
| Type | AIRPURION 90 active |
| Air disinfection: | during continuous operation |
| Disinfection degree of 80% | approx. 550 m³ room volume |
| Disinfection degree of 88% | approx. 75 m³ room volume |
| Guaranteed minimum UVC dose per single pass | 65 J/m² |
| Air circulation rate | 36 m³/h |
| Fan noise level | 32 dB |
| Housing dimensions | 1000 x 105 x 105 LxWxH in mm |
| UV lamp monitoring | Operating hour counter (OTC) |
| Weight | approx. 6 kg |
| Number of emitters | 1 |
| Emitter lifetime | 10,000 h |
| Max temperature | 40°C |
| Housing protection rating | IP 54 |
| Electrical connection Total power | 230V/50Hz or 110V/60Hz approx. 98W |
| Electrical power PURION UV lamp | approx. 90W |
| Total UVC power | approx. 32W (254 nm) |
| Circuit protection | 10 A |
For the AIRPURION 90 active system, PURION mounting kits are available.
Mounting kits
For cleaning the immersion tube system, we recommend the PURION Service KIT.
PURION Service-KIT
Our UV system AIRPURION 90 active is used for:
- Air disinfection
Advantages:
- Continuous operation even when people are present
- No odor issues
- Low maintenance operation
- Low operating costs
Download datasheet
DATASHEET AIRPURION ACTIVE 90 E T
Further product portfolio
-
-
In addition to UV-C disinfection, the principle of photocatalytic oxidation can be used to reduce odors
-
Targeted UV-based air disinfection in ventilation and air conditioning systems
Information about our company
-
Scientific background to the procedures we use.
-
Find a retail partner near you
-
All information about our quality promise