The PURION® 2500 36 W system is available in electropolished stainless steel. It is used for the disinfection of drinking water for flow rates of up to 2,500 l/h and a transmission (or turbidity) of the water of at least 90% per cm. The UV lamps used are characterised by a long service life, high disinfection performance and low energy consumption. The power supply can be either 230V/50Hz, 120V/60Hz or 24V DC (especially for use in mobile devices such as mobile homes and for areas where a stable mains power supply is not guaranteed and alternative energy sources must be used). The PURION® 2500 36 W system can also be equipped with higher wattage lamps to realise higher dose rates than 400 J/m² or for use in media with transmissions below 60% per cm. The power supply is 230 V/50 Hz or 110 V/60 Hz.

The compact design allows easy and tool-free lamp removal and lamp replacement, for example at the end of the lamp's service life. The quartz immersion tube can also be removed or fitted without tools for cleaning purposes. The water to be treated flows through the housing and is channelled along the quartz immersion tube in which the lamp is mounted. The low water film thickness of just 7.5 mm, i.e. the distance between the Uv light outlet on the quartz surface and the inside wall of the housing, guarantees optimum penetration of the water by the Uv light.

Technical Data

Our PURION® 2500 36 W UV system is used for:

• Drinking Water
• Air Conditioning Water
• Permeate Disinfection

And with higher lamp power also for:

• Sewage Treatment Plant Effluent Water
• Pharmaceuticals
• Greenhouses

The PURION Mounting Set SINGLE 1 is available for the PURION 2500 36W system.

Mounting Set SINGLE

For cleaning the immersion tube system, we recommend the PURION Service KIT.

PURION Service-KIT

Download Datasheet

Datasheet PURION 2500 36W